Cypress Brings Instant-on to Automotive, Industrial and IoT Applications with the Industry's First Serial Memory Solution in a Low Pin-Count Multi-chip Package

New Solution Combines Cypress's HyperFlash™ and HyperRAM™ Memories Based on the High-Bandwidth, Low-Pin-Count HyperBus™ Interface

SAN JOSE, Calif., Nov. 3, 2016 — (PRNewswire) — Cypress Semiconductor Corp. (Nasdaq: CY) today announced the qualification of a small-footprint memory solution that enables instant-on applications. The solution contains Cypress's 3V 512-Mbit HyperFlash™ and 64-Mbit HyperRAM™ memories in a multi-chip package (MCP) measuring only 8-mm by 6-mm. The Cypress HyperFlash and HyperRAM MCP combines a high-speed NOR flash memory for fast-boot, instant-on capability with a self-refresh DRAM for expanded scratchpad memory in a low-pin-count package for space-constrained and cost-optimized embedded designs. The solution is ideal for a wide range of applications, including automotive clusters and infotainment systems, communication equipment, industrial systems and high-performance consumer products.

Pictured is Cypress's small-footprint memory solution for instant-on applications. The solution includes 512-Mbit HyperFlash(TM) and 64-Mbit HyperRAM(TM) memories in a multi-chip package (MCP) measuring only 8-mm by 6-mm.

The HyperFlash and HyperRAM MCP leverages Cypress's 12-pin HyperBus™ interface and is housed in a 24-ball ball grid array (BGA) package that shares a common footprint with both discrete HyperFlash and HyperRAM products. This common footprint enables design engineers to implement a single-pad layout that supports either discrete device or the HyperFlash and HyperRAM MCP, allowing changes at any point in the design or product lifecycle without affecting board layout. This flexibility enables differentiated end products based on a single platform design, saving development time and minimizing cost. More information on Cypress's HyperFlash and HyperRAM MCP is available at www.cypress.com/HyperFlash-RAM-MCP.

"Cypress first introduced the HyperFlash and HyperRAM memory products to provide reliable high-performance, low-pin-count solutions that reside on a single 12-pin HyperBus to simplify embedded system board design," said Rainer Hoehler, Vice President of the Flash Business Unit at Cypress.  "The HyperFlash and HyperRAM MCP is the next logical progression. It is an optimum solution to get a full high-performance memory subsystem with 70% fewer pins and a 77% smaller footprint compared to existing SDRAM and Quad SPI solutions." 

Customers and partners developing Field-Programmable Gate Array (FPGA), Application-Specific Integrated Circuit (ASIC) or Application-Specific Standard Product (ASSP) solutions, receive Cypress's full support through a HyperBus Master Interface Controller IP Package. Customers can easily integrate this IP into their host controller platform to accelerate their product design cycles. The Controller IP supports both HyperFlash and HyperRAM products and is free of charge and royalty-free.

The HyperFlash and HyperRAM MCP is offered in the industrial (-40°C to +85°C) and industrial-plus (-40°C to +105°C) temperature ranges. Both temperature ranges are also available with AEC-Q100 automotive qualification and with production part approval process (PPAP) support.

Cypress is demonstrating its full portfolio of embedded solutions for the automotive, industrial and IoT markets at the Electronica 2016 trade show in hall A5 booth number 318 booth of the Messe München in Munich, Germany from November 8-11. Cypress enables innovative systems with its MCU, PSoC® programmable system-on-chip and CapSense® capacitive-sensing solutions, state-of-the-art wireless connectivity solutions, analog Power Management ICs (PMICs), USB-based connectivity solutions and high-performance memories.

Availability
The Cypress 3V, 512Mb HyperFlash and 64Mb HyperRAM MCP is qualified now with production beginning in the fourth quarter of 2016. 1.8V HyperFlash and HyperRAM MCP products will be available beginning in the first quarter of 2017. 

About Cypress HyperFlash™ Memory 
High-density (128Mb to 512Mb) HyperFlash NOR Flash memories deliver the bandwidth required for the highest-performance embedded systems found in automotive instrument clusters, automotive infotainment systems, communication systems and industrial applications. They deliver the highest read bandwidth at 333 MBps, more than four times faster than Quad SPI NOR flash, with one-third the number of pins of parallel NOR flash. More information on HyperFlash is available at www.cypress.com/hyperflash.

About Cypress HyperRAM™ Memory
Cypress HyperRAM devices are high-speed, self-refresh Dynamic RAM (DRAM) with a HyperBus interface for systems requiring expanded scratchpad memory. HyperRAM provides read/write bandwidth of up to 333 MBps in DDR mode. Available in the industry's smallest package, the 6 mm x 8 mm 24-ball BGA, HyperRAM shares a common footprint with HyperFlash NOR Flash Memory. More information on HyperRAM is available at www.cypress.com/hyperram.

About Cypress HyperBus™ Interface
The efficient 12-pin Cypress HyperBus interface consists of an 8-pin address/data bus, a differential clock (2 signals), one chip select and a read data strobe for the controller, reducing the overall cost of a system. Memories based on the interface enable faster systems with quicker response times and rich user experiences. The Cypress HyperBus interface enables a wide range of high-performance applications, such as automotive instrument clusters, infotainment and navigation systems, handheld displays, digital cameras, projectors, factory automation systems, medical diagnostic equipment, home automation systems and home appliances. More information on Cypress's industry-leading high-performance memory portfolio is available at www.cypress.com/memory.

Follow Cypress Online
Join the Cypress Developer Community, read our Core & Code blog, follow us on TwitterFacebook and LinkedIn, and watch Cypress videos on our Video Library or YouTube.

About Cypress
Founded in 1982, Cypress is the leader in advanced embedded system solutions for the world's most innovative automotive, industrial, home automation and appliances, consumer electronics and medical products. Cypress's programmable systems-on-chip, general-purpose microcontrollers, analog ICs, wireless and USB-based connectivity solutions and reliable, high-performance memories help engineers design differentiated products and get them to market first. Cypress is committed to providing customers with the best support and engineering resources on the planet enabling innovators and out-of-the-box thinkers to disrupt markets and create new product categories in record time. To learn more, go to www.cypress.com.

Cypress, the Cypress logo, PSoC and CapSense are registered trademarks and HyperBus, HyperFlash and HyperRAM are trademarks of Cypress Semiconductor Corp. All other trademarks are property of their owners.

Photo - http://photos.prnewswire.com/prnh/20161102/435708
Logo - http://photos.prnewswire.com/prnh/20150506/214346LOGO

 

To view the original version on PR Newswire, visit: http://www.prnewswire.com/news-releases/cypress-brings-instant-on-to-automotive-industrial-and-iot-applications-with-the-industrys-first-serial-memory-solution-in-a-low-pin-count-multi-chip-package-300356587.html

SOURCE Cypress

Contact:
Cypress
Samer Bahou, Cypress PR, (408) 232-4552
Email Contact
Web: http://www.cypress.com




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us
ShareCG™ is a trademark of Internet Business Systems, Inc.

Report a Bug Report Abuse Make a Suggestion About Privacy Policy Contact Us User Agreement Advertise