NatureWorks and Jabil Collaborate to Offer New Ingeo PLA-based Powder for Selective Laser Sintering 3D Printing Platforms

Renewably sourced biomaterials and lower sintering temperature result in a more sustainable substrate for powder bed fusion technologies requiring less energy use and a carbon footprint 89% smaller than PA-12

PLYMOUTH, Minn. — (BUSINESS WIRE) — April 26, 2023NatureWorks, leading manufacturer of polylactic acid (PLA) biopolymers, announces, in collaboration with Jabil Inc., a global manufacturing solutions provider, the availability of an Ingeo™ PLA-based powder formulation for powder-bed fusion technologies, including selective laser sintering (SLS) printer platforms. The new product marketed as Jabil PLA 3110P, offers a cost-effective option, with lower sintering temperature, and 89% smaller carbon footprint1 compared to the incumbent PA-12. Ingeo PLA is derived entirely from annually renewable resources, meeting demand for a biobased alternative to petrochemical-based powders, like PA-12.

This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20230426005210/en/

The new Ingeo™ PLA-based powder formulation marketed as Jabil PLA 3110P offers a cost-effective option, with lower sintering temperature, and 89% smaller carbon footprint compared to the incumbent PA-12 when used in powder-bed fusion technologies. (Photo: Business Wire)

The new Ingeo™ PLA-based powder formulation marketed as Jabil PLA 3110P offers a cost-effective option, with lower sintering temperature, and 89% smaller carbon footprint compared to the incumbent PA-12 when used in powder-bed fusion technologies. (Photo: Business Wire)

“NatureWorks’ expertise in performance biomaterials and Jabil’s position as a leader in design, product development and manufacturing of highly engineered and qualified materials made our collaboration a natural choice,” said Salvador Ortega, Global Industry Manager, NatureWorks. “The resulting Jabil PLA 3110P powder is suitable for applications where incumbents may be over-engineered, thereby delivering both a lower cost and reduced carbon footprint product, compared to conventional powders.”

Compared to 3D printing methods such as fused filament fabrication (FFF), advantages of SLS include greater output, accuracy, and design freedom. As a result, this Ingeo PLA-based powder can form the custom, precision geometries needed for thermoforming and compression molds. Moreover, the significantly lower sintering temperature of this product translates to energy savings and faster start-up, allaying the relatively high energy usage of SLS-systems.

“Jabil is excited to work with NatureWorks in driving adoption of Jabil PLA 3110P, as well as other highly engineered and qualified materials that deliver value-added attributes while reducing environmental impact,” said Luke Rodgers, senior director of R &D for additive manufacturing at Jabil. “Our ongoing collaboration will enable us to propel the additive manufacturing industry forward with more sustainable material choices for a wide range of customer requirements.”

All of NatureWorks’ Ingeo biopolymer materials are derived from plant sugars. Plants naturally capture and sequester atmospheric CO2 in the form of long-chain sugar molecules. Fermentation of those sugars results in production of lactic acid, which NatureWorks uses to produce a range of high-performance materials with a significantly smaller carbon footprint than petrochemical-based polymers.

The Jabil PLA 3110P powder made with Ingeo for SLS 3D printing is now available directly from Jabil through their sampling program. Visit Jabil.com for more details.

Parts printed with this new powder will be on display at RAPID + TCT, May 2-4 in Chicago in the NatureWorks booth (#3056) and the Jabil booth (#2140).

1 Comparison between the global warming potential of PA-12 and Ingeo PLA biopolymer.
PA-12 data source: Life cycle assessment of a PA12 powder material for additive manufacturing, Fraunhofer Institute, November 7, 2022. Ingeo PLA biopolymer data source: Life Cycle Inventory and Impact Assessment data for 2014 Ingeo™ Polylactide Production. Industrial Biotechnology, Vol 11, No. 3. Pg. 167-180. June 2015.

About NatureWorks

NatureWorks is an advanced materials company offering a broad portfolio of biopolymers and biochemicals made from renewable resources. With performance and economics that compete with oil-based materials, naturally advanced Ingeo™ biomaterials are valued for their unique functional properties and used in products from coffee capsules and appliances to tea bags and 3D printing filament. NatureWorks is jointly owned by Thailand’s largest ASEAN leading integrated petrochemical and refining company, GC, and Cargill, which provides food, agriculture, financial and industrial products and services to the world. For more information visit natureworksllc.com or follow NatureWorks on Twitter at @natureworks.



Contact:

Americas & Europe
Andrea Ziadi
Email: Email Contact
Tel: +1 952-562-3330

Asia Pacific & Japan
Pauline Ning
Email: Email Contact
Tel: +852-9400 5564




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us
ShareCG™ is a trademark of Internet Business Systems, Inc.

Report a Bug Report Abuse Make a Suggestion About Privacy Policy Contact Us User Agreement Advertise