[ Back ]   [ More News ]   [ Home ]
Mouser Showcases Latest Offerings From HARTING for Industrial Networking, Factory Automation, and More

February 19, 2023 –  Mouser Electronics, Inc., the authorized global distributor with the newest electronic components and industrial automation products, is stocking the latest innovations from  HARTING, a global leader in the  connector industry. Since 2003, Mouser has offered HARTING’S extensive portfolio of over 23,000 high-quality electrical connector solutions, for use in mechanical and plant engineering, broadcast and entertainment, factory  automationpower generation and distribution, as well as  industrial electronics and  telecommunication.

Mouser currently has over 7,000 HARTING part numbers in stock including the  ix Industrial® Ethernet interfaces. These interfaces are suitable for 10GBit/s Ethernet/Cat 6A, featuring two miniaturized interfaces, including Type A for data interface for industrial Ethernet, and Type B for signals and serial BUS systems with 360° shielding. The ix Industrial® interfaces feature an IP20 protection rating, 360° contact shielding, 26AWG to 22AWG IDC ranges and are standardized according to the IEC 61076-3-124, with an operating temperature range of -40°C to +85°C.

The  T1 Industrial M12 single-pair Ethernet (SPE) connectors deliver a highly optimized, shielded, high-frequency and mechanical robustness, with shock and vibration resistance according to IEC 61373 category 1B (railway standards) for 10Gbit/s speed over industrial ethernet cable assemblies, switches, IPCs, modems, HMIs, PLCs, sensors, and actuators. The T1 SPE connectors enable ethernet data transmissions using only two wires and the simultaneous power supply for terminals via a power-over data line (PoDL).

HARTING’s  SPE Switch and Media Converters feature T1 SPE Ports, allowing for size reduction in cable interface density, designed for SPE end devices in existing  networks and evaluating/testing applications. This overall slim design means increased space optimization in cabinets while providing seamless SPE infrastructure utilizing the IEC 63171-7 standard. SPE Switch and Media Converters are the bridge/gateway between installed networks and single-pair Ethernet devices.

The  har-flex® HD Card Edge® connectors offer fine pitch, card edge design for high-speed transmission for relays, industrial controls, scanners, PLCs, HMI, routers and servers,  data storage, and ultrasound applications. The har-flex connectors provide a high data rate in a small footprint, with higher current and plastic alignment pegs, three choices of hold-down designs, and increased versatility for application needs and accurate position on PCB.

To learn more about HARTING products, visit  https://www.mouser.com/manufacturer/harting/.

 

As a global authorized distributor, Mouser offers the world's widest selection of the newest semiconductors and electronic components — in stock and ready to ship. Mouser's customers can expect 100% certified, genuine products that are fully traceable from each of its manufacturer partners. To help speed customers' designs, Mouser's website hosts an extensive library of technical resources, including a  Technical Resource Center, along with product data sheets, supplier-specific reference designs, application notes, technical design information, engineering tools and other helpful information.

About Mouser

2024 - Mouser Electronics, a Berkshire Hathaway company, is an authorized semiconductor and electronic component distributor focused on New Product Introductions from its leading manufacturer partners. Serving the global electronic design engineer and buyer community, the global distributor's website, mouser.com, is available in multiple languages and currencies and features more than 6.8 million products from over 1,200 manufacturer brands. Mouser offers 28 support locations worldwide to provide best-in-class customer service in local language, currency and time zone. The distributor ships to over 650,000 customers in 223 countries/territories from its 1 million-square-foot, state-of-the-art distribution facilities in the Dallas, Texas, metro area. For more information, visit  https://www.mouser.com.

About HARTING

2024 - HARTING develops, manufactures and sells electrical and electronic connectors, device terminations, backplanes, network components as well as cable harnesses for networks or machinery, or for power and data application in factories. HARTING products are used in mechanical and plant engineering, broadcast and entertainment, factory automation, power generation and distribution as well as industrial electronics and telecommunication.

Trademarks

Mouser and Mouser Electronics are registered trademarks of Mouser Electronics, Inc. All other products, logos, and company names mentioned herein may be trademarks of their respective owners.

For further information, contact:
Kevin Hess, Mouser Electronics
Senior Vice President of Marketing
+1 (817) 804-3833
Email Contact
For press inquiries, contact:
Kelly DeGarmo, Mouser Electronics
Manager, Corporate Communications and Media Relations
+1 (817) 804-7764
Email Contact