[ Back ]   [ More News ]   [ Home ]
Excellicon's Comprehensive Patented Timing Constraints Promotion Technology

Laguna Hills, CA - Excellicon's patented timing constraints methodology provides a unique and accurate methodology to promote timing constraints for hierarchical designs accurately in minutes.

When dealing with bottom-up methodology integrating lower blocks and sub-systems into the SOC design, there is a need to take advantage of existing timing constraints which may accompany the IP-block or previous versions of a sub-system design.  When it comes down to definition of timing constraints, in such instances the designer is faced with the challenge of promoting existing timing constraints to higher level blocks and eventually the SOC.

The designer has several choices to promote the timing constraints. First, he/she has the option of rewriting timing constraints for the top level from scratch, which may not be practical as it requires a great deal of knowledge of the design, the interface protocols of the IP’s, not to mention the time it takes to take on such task, perhaps months. 

A more simplistic and semi-automated method is often used by reading all lower-level block constraints and essentially manipulating the hierarchy delimiters using any existing STA. Once the higher-level constraints are created, this option still requires a great deal of manual manipulation and corrections and in the interest of comprehensive verification one must still perform extensive equivalency checks to ensure the eventual top level timing constraints is the true representation of underlying timing constraints of the lower-level blocks. This method assumes that the timing constraints are available for all lower-level blocks. Absence of which, this method cannot be used or if used leads to missing timing definitions and manual mistakes which will certainly take weeks to clean up iteratively.

Promotion with either of the above two options can lead to paths which may not be timed due to issues in promoting the timing constraints. Such misses can eventually result in timing closure issues and unnecessary iterations to resolve such paths and more verification work. In addition, several flavors of the timing constraints are also needed to accommodate the hierarchical STA flow. This manual work is prone to mistakes and missed timing definitions.

Excellicon’s Constraints Manager patented solution provides a third and more comprehensive approach to promotion performed in minutes. The goal of the tool is to provide a comprehensive methodology-based approach to constraints promotion as part of Excellicon’s commitment to providing an end-to-end timing constraints closure methodology as opposed to one off feature performing an isolated point task.

In order to achieve a comprehensive and methodology-based solution to promotion there is a need for a timing constraints generation engine where the provided timing constraints or legacy timing constraints can be augmented, corrected, and consolidated as the information is promoted through various layers of hierarchy. If the timing constraints is not available for a particular lower-level block or IP, the Constraints Manager as part of the promotion, automatically generates the required timing constraints for that block.

  Excellicon Hierarchical Design Constraints Excellicon Clocking Map

Figure 1

For example, in figure 1, the green boxes represent the IP blocks with NO timing constraints, while the orange boxes represent IP’s with the timing constraints. During constraints promotion, the tool promotes the orange box SDC’s to any level of the hierarchy specified by the user. The timing constraints for the green IP boxes are automatically extracted such that a complete promoted SDC file for the top level is generated. Had there been SDC’s associated with the green boxes, the tool would have promoted all the IP SDC’s to the top level.

The generation engine ensures that there are no gaps in definition of the timing constraints, and it will provide 100% coverage based on actual HDL code eliminating the possibility of any missing timing info. In order to achieve this goal, Excellicon’s Constraints Manager products provides a detailed clock extraction (also visualized through clock map, shown in figure 1) which can then be used to ensure all paths in the design are considered and timed when running STA analysis.

 

Basics

Block level constraints can be promoted to the top level in several ways. For example, in Figure 2, the Block for which the constraints are to be promoted is shown in blue outlined box. The symbol C denotes the create_clock while the G represents the create_generated_clock constraint. In order to promote the original gray C clock to the top level, a green colored G and C clock must be created at the appropriate location at the Top level. The gray C clock must be eliminated so that the green G clock is not blocked. The red arrow shows the associated master relationship.

Excellicon Constraints Promotion

Figure 2

 

However, this method has potential of altering the original timing intent of the Block. If there were any timing constraints referring to the C clock in the original block-level SDC file, they also need to be modified such that they now refer to the G clock instead of the gray C clock.

 

Instead of eliminating the original C clock, a better approach is to replace the gray C clock with another G clock, shown as a yellow G (with the same name as the C clock) as shown in Figure 3.

 

Excellicon Constraints Promotion

Figure 3

 

With this patented approach, the original timing intent of the Block IP is maintained since any timing constraints which previously referred to the C clock, now refers to the replaced G clock. This approach also has the benefit of isolating the original timing intent of the block from the rest of the SoC.

 

Isolating the Original Timing Intent

In figure 4, the original clocks again are shown in green, while the replacement clocks are shown in yellow. Here, at the IP1 level, the C1 and G1 clocks are synchronous (G1 is divide-by-2 of C1) and are clocking the synchronous timing path from FFA to FFB. However, these two clocks are also entering the IP2 block where they are driving two separate clusters for flops, FF1 and FF2 that do not have any connectivity between them, thus defined as asynchronous in IP2’s SDC, through:

set_clock_groups -asynchronous -group {C_FF1} -group {C_FF2}

After promotion, the top level promoted SDC will contain C1, G1, G_FF1 and G_FF2 clocks, and the clock relationship for IP2 clocks is maintained through:

set_clock_groups -asynchronous -group {G_FF1} -group {G_FF2}

This ensures that the replacement G_FF1 and G_FF2 clocks remain asynchronous (keeping with the original intent of the IP2 SDC), while C1 and G1 clocks continue to be synchronous.

Excellicon Constraints Promotion

Figure 4

 

The replacement G clocks are only created if there is a need to preserve the timing intent. If the IP2 clocks were also synchronous, the tool would have eliminated the C_FF1 and C_FF2 clocks and not create the replacement G_* clocks. Also, if IP1 clocks were not defined, the tool would have automatically extracted the IP1 clocks and stitched it to the IP2 clocks in the promoted top level SDC.

 

Exception Leakage

In order to prevent unintended constraints leakage from the IP block that is being promoted, Excellicon’s Constraints Manager, exhaustively analyzes the all the constraints present in the block level SDC such that there is no leak (mainly timing exceptions) from the block to the top.

Excellicon Constraints Promotion

Figure 5

 

In Figure 5, by default, G3 of blk1 directly master to Gi, however if there is a timing exception specified from Gi to elsewhere, it has a potential to leak out of blk0 and affect FF cluster of flops. To prevent such a situation, the tool creates a generated clock (Gb) at the boundary of the blk0.  Thus, the promoted SDC will contain C1, G2, Gi, Gb and G3 clocks.

 

Satisfying different Methodologies

As the chip undergoes different stages of implementation, different types of SDC’s are required. For example, for logic synthesis the SDC that propagates the fastest clock is sufficient. However, for P&R or for final signoff an SDC with all clock propagating is required. To satisfy this situation, the tool provides additional configurability. The main ones are:

  1. Single Block Level Clock to Single Top-Level Clock (SBST)
  2. Multiple Block Level Clocks to Multiple Top-Level Clocks (MBMT)

 

In the SBST method, the clocks are mapped from a single clock to a single clock. Thus, if there are multiple clocks at the top level, but a single clock at the block level, the tool maps the single block level clock to the fastest top-level clock.

Excellicon Constraints Promotion

Figure 6

 

In figure 6, the original block level clock is B1 and Gi, whereas the top-level clocks are C1 and C2. During the SBST promotion flow, the B1 was replaced by G1, however, G1 now masters to the C1 clock, since C1 is faster than C2. C2 propagates up to the BLOCK but is blocked at the boundary.

For STA signoff, propagation of all clocks may be required in order to time all the paths related to them. For such a case, the MBMT type of promotion is used to generate such timing constraints. In a strict sense, this method is not a pure constraints promotion, rather it’s a promotion combined with completion, so that it can satisfy the implementation and sign off requirements.

Excellicon Constraints Promotion

Figure 7

 

In the MBMT method, additional clocks are created throughout the chain of propagation of original block clocks in order to propagate the additional top clocks. Figure 7 illustrates this behavior. The C1 clock domain promotion is identical to the SBST method, however, for the C2 clock domain, the G2 clock is created which now masters to C2 along with G3 clock that masters to G2.

Conclusion

Excellicon’s Constraints Manager is highly configurable and very flexible in terms of usage. It allows users to provide whatever is available. For example, in the early stages of the chip design, the timing constraints may be available only for some IP blocks, but not for other blocks. In this case, the Constraints Manager will extract the timing information for the blocks without the SDC and promote the ones with the SDC to the Top level.

In other cases, particularly for the next revisions of the chip, the timing constraints for most blocks are available along with somewhat mature top-level constraints. In this case, the tool promotes and “stitches” the constraints together and the extraction only takes place for the logic that is not clocked. The mix and match approach satisfies all aspects of chip development stages and all layers of hierarchies.

Excellicon’s automated solution has been used for various types of chips in various industries with necessary flexibility to be adopted to desired methodology. The configurability provided by Excellicon tools ensures that the users have the most flexibility and control over the tool behavior and output to fit their specific needs.

In conclusion, Excellicon’s fully automated and patented flow can promote the timing information to the higher levels of hierarchy in minutes. This 1) ensures completeness and 100% coverage of timing constraints at the top level, and 2) Simplifies equivalency checks when comparing various layers of hierarchy against lower levels or integrated blocks.

Author: Himanshu Bhatnagar

About Excellicon

Excellicon is an innovative provider of end-to-end Timing Constraints Analysis and Early design planning and debugging solutions for the automation of constraints, authoring, completion, and validation from RTL to GDS with innovative analysis and debugging infrastructures. Excellicon products are also targeting early design planning and viability analysis helping to detect design implementation issues very early on. Excellicon products are Constraints Manager (ConMan), Constraints Certifier (ConCert), Exception-ToolBox (ET), Budgeting-Tool Box (BT), Equivalence-Checker (EQ), ConStruct, ConTree, and ConTour address the needs of designers at every stage of SOC design and implementation in a unified environment. – Design & Timing Closure; Done Once! Done Right!

For further information contact:

Rick Eram

www.excellicon.com



Read the complete story ...