Cadence Webinar: How to Address Your Toughest Serial Bus Design Challenges with EDA and Measurement Correlation

 

 

     
 

Date / time: Thursday, May 8th at 10:00AM Pacific

While modeling tools like IBIS-AMI and S-parameters are commonly used for EDA, they are relatively new to the lab environment.  However, if used appropriately in the lab, these tools can significantly reduce your time required for physical layer (PHY) test and lower product development costs. 

This webinar will teach you how to use modeling tools to correlate simulations with your physical layer measurements. The new approach discussed in this webinar will enable you to confidently move from the simulation environment to the lab while consistently reducing test time!
Sign up now!

Attend this Knowledge Series webinar to learn more about:
 
How to effectively use modeling tools to correlate your simulations and physical layer measurements 
Techniques for removing reflections, cross-coupling and loss in PHY measurements to allow visibility of true circuit behavior
Understanding issues in a complete circuit without having to build a full test board

We will conclude the webinar with a live question and answer session where you can have a technical dialog with the Cadence and Tektronix presenters.

Don't miss out -  Register today!

 
     

© 2014 Cadence Design Systems, Inc. All rights reserved.
Cadence respects your online time and privacy.
Cadence Design Systems, Inc. | 2655 Seely Avenue San Jose, CA 95134

 




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us
ShareCG™ is a trademark of Internet Business Systems, Inc.

Report a Bug Report Abuse Make a Suggestion About Privacy Policy Contact Us User Agreement Advertise