OPEN MIND presents the 2014.2 version of its hyperMILL® CAM/CAD suite

hyperMILL®: Perfection down to the smallest detail

Wessling (Germany), Jan 21, 2015 – hyperMILL® 2014.2 is the latest release of the high-end CAM software from OPEN MIND Technologies AG. In addition to a number of new functions, there are also many enhancements to existing functions.

OPEN MIND is one of the five leading CAM manufacturers in the world and hyperMILL® is one of the best CAM systems on the market, according to the NC Market Analysis Report 2014 compiled by CIMdata, a market research company. OPEN MIND is releasing the second version this year in order to live up to expectations to offer users one of the most innovative CAM solutions. In addition to a key extension for solid modelling in hyperCAD®-S, the CAD part of the system, hyperMILL® 2014.2 features a range of improvements for CAD programmers and machining.

3D shape Z-level finishing

When it comes to Z-level finishing, CAD systems usually simply follow the X and Y coordinates. If the bottom surface is curved, the milling result is not optimal and it is necessary to perform a number of rework machining steps. A new function for 3D shape Z-level finishing makes it possible to reference curved bottom surfaces, after which the milling paths are aligned. As a result, the milling tool nestles optimally along the boundary edge between the bottom and the wall. All intermediate levels are offsets of the bottom plane.

The OPEN MIND soft bounding concept is also integrated into this new function. This ensures that the boundaries to adjacent surfaces are calculated more precisely and that sharp outer edges are machined more smoothly. User benefits include an optimised finish and reduced programming and machining times.

3D rest material machining

The open, deep, steep and flat areas of cavities can be machined in one job with collision avoidance. The rest material areas that are recognised during the collision avoidance are transferred automatically to the subsequent job. To this end, optimal tool selection and positioning once again take place. For example, a longer tool or modified position. This process is repeated until the required contour is achieved. Work here has been greatly simplified for CAM programmers.

hyperMAXX® improvements

hyperMAXX®, the high-performance cutting (HPC) module for hyperMILL®, was also supplemented in some places. This includes plunging the milling tool into the material at pre-drilled holes. This saves ‘ramping-in’ of the milling tool at the start of machining. The greatest advantage of this method is that it protects tools, particularly in materials that are difficult to cut. The machining process is also collision-checked. Furthermore, it is now possible to select a zigzag mode in hyperMAXX®. This mode is particularly suited to machining large workpieces, as it prevents time-consuming repositioning movements, thereby significantly shortening machining times.

2D plunge milling

2D plunge milling is another new feature. Here, material is removed solely by plunging a milling tool. The new cycle is suitable for both roughing and finishing. The advantage here once again lies in the fast machining and particular suitability for materials that are difficult to cut.

Available images

The following images are available for download in printable format at:
http://www.htcm.de/kk/openmind

 

 

 

 

2D plunge milling for efficient roughing and finishing

 

 

 

 

3D shape Z-level finishing allows curved bottom surfaces to be referenced.

 

 

 

 

Rest material areas that are recognised are transferred automatically to the subsequent job.

 

 

 

Milling tool plunges at pre-drilled holes in the material.

 

 

Image source (4): OPEN MIND

About OPEN MIND Technologies AG

OPEN MIND Technologies AG is a leading developer of CAM/CAD software and postprocessors for designing and manufacturing complex moulds and parts. OPEN MIND is one of the world’s five largest providers of CAM solutions according to the NC Market Analysis Report 2014 compiled by the CIMdata market research company.

OPEN MIND offers an extensive selection of products ranging from 2D feature-oriented solutions for milling standard parts through to software for 5axis simultaneous machining.

OPEN MIND Technologies AG is represented in all key markets in Asia, Europe and America with their hyperMILL® software, which is used in the automotive, tool and mould manufacturing, mechanical engineering, medical and aerospace, and watch and jewellery industries.

OPEN MIND Technologies AG is a Mensch und Maschine company ( www.mum.de).

Additional information is available upon request or from our website at www.openmind-tech.com.


Contacts:
OPEN MIND Technologies USA, Inc.
1492 Highland Avenue, Unit 3
Needham MA 02492
USA
Phone: +1  339  225  4557 office
Phone: +1  888  516 1232 x0 toll-free
Fax: +1  270  912 5822
E-mail: Email Contact

 

OPEN MIND Technologies UK Ltd., Oxford
Units 1 and 2
Bicester Business Park
Telford Road
Bicester, Oxfordshire OX26 4LN
England
Fon: +44  1869  290 003
Fax: +44  1869  369 429
E-mail: Email Contact

 

Head office:
OPEN MIND Technologies AG, Argelsrieder Feld 5, 82234 Wessling, Germany
Fon: +49 8153 933-500, Fax: +49 8153 933-501
E-mail: Email Contact
website: www.openmind-tech.com

 

Press contact:
HighTech communications GmbH
Brigitte Basilio
Grasserstrasse 1c
80339 Munich, Germany
Phone: +49 89 500778-20
Fax: +49 89 500778-78
E-mail: Email Contact
Website: www.htcm.de

 

 




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us
ShareCG™ is a trademark of Internet Business Systems, Inc.

Report a Bug Report Abuse Make a Suggestion About Privacy Policy Contact Us User Agreement Advertise