Qorvo® Unveils Groundbreaking Integration and Performance with Motor Control and Drive SoC for Brushless DC Power Tools

 New Power Application Controller (PAC™) Reduces BOM by as much as 30%  

GREENSBORO, N.C., Nov. 14, 2019 (GLOBE NEWSWIRE) -- Qorvo® (Nasdaq:QRVO), a leading provider of innovative RF solutions that connect the world, today introduced the highest-performing MCU and integrated motor control and drive product on the market. The single, system-on-chip (SoC) controller enables high efficiency, high performance and a longer battery life in tools powered by brushless DC (BLDC) motors.

David Briggs, director, Qorvo Power Management & Motor Drive Products, said, “Qorvo is the first to deliver an integrated, programmable and intelligent gate driver solution with a high-performance FLASH MCU in a single device. The PAC5527 allows OEMs to design high-performing, highly reliable tools in the smallest footprint.”

Qorvo’s new PAC5527 Power Application Controller® (PAC™) integrates multiple devices into a single SOC – a high-performance, FLASH-based 150MHz Arm® Cortex-M4F® with 128kB of FLASH; power management; programmable-current high-side and low-side gate drivers; and signal conditioning components. This combination enables significant PCB space savings and reduces the BOM by as much as 30 percent over competing solutions.

Its high-performance MCU allows designers to add other value-added features, such as safety standards, diagnostics and self-checking capabilities, enhancing tool reliability and quality. Consumers benefit from lighter, more compact and reliable tools with longer battery life.

BLDC motors are seeing widespread adoption, thanks to their maintenance-free operation, longer life span, power efficiency and quieter operation. In addition to power and garden tools, next-generation systems that are switching from brushed DC motors to BLDCs include white goods, HVAC systems, automobiles, aerospace, defense and medical devices.

The PAC5527 is available now and offers these specifications:

MCU
  • 150MHz Arm® Cortex®-M4F
  • 128kB FLASH, 32kB SRAM with ECC
  • 12b 2.5MSPS SAR ADC with trigger and sequence engine
I/O
  • 16 3.3V IO
  • 10 5V Open-drain IO
Power Management
  • 48V Charge Pump DC/DC Controller
  • 5V/100mA system supply
  • LDOs for MCU Core, IO, Analog
  • Low-power hibernate mode (8µA)
Gate Drivers
  • 3 High-side and 3 low-side 48V gate drivers with programmable current
  • Integrated gate drive slew rate control
Physical
  • 6x6mm, 48-pin QFN
  • TA = -40°C to 125°C
  

Qorvo’s Programmable Power Management business unit delivers power management and intelligent motor drive expertise to key growth markets. The company’s portfolio of analog and mixed-signal SoCs provides scalable core platforms used in charging, powering and embedded digital control systems for industrial, commercial and consumer applications. Qorvo offers  Power Application Controllers® (PAC™) and  DC-DC power management products that significantly improve system reliability while reducing solution size, cost and system development time. Learn more at www.qorvo.com/products/power-management.

About Qorvo
Qorvo (Nasdaq: QRVO) makes a better world possible by providing innovative Radio Frequency (RF) solutions at the center of connectivity. We combine product and technology leadership, systems-level expertise and global manufacturing scale to quickly solve our customers' most complex technical challenges. Qorvo serves diverse high-growth segments of large global markets, including advanced wireless devices, wired and wireless networks and defense radar and communications. We also leverage unique competitive strengths to advance 5G networks, cloud computing, the Internet of Things, and other emerging applications that expand the global framework interconnecting people, places and things. Visit  www.qorvo.com to learn how Qorvo connects the world.

Qorvo is a registered trademark of Qorvo, Inc. in the U.S. and in other countries.  All other trademarks are the property of their respective owners.

  
Investor Relations Contact:
Doug DeLieto
VP, Investor Relations
W +1-336-678-7968
Media Contact:
Katie Caballero
Marketing Communications Manager
Qorvo Infrastructure and Defense Products
W + 1 972-994-8546
Katie.caballero@qorvo.com 
  

This press release includes "forward-looking statements" within the meaning of the safe harbor provisions of the Private Securities Litigation Reform Act of 1995.  These forward-looking statements include, but are not limited to, statements about our plans, objectives, representations and contentions, and are not historical facts and typically are identified by use of terms such as "may," "will," "should," "could," "expect," "plan," "anticipate," "believe," "estimate," "predict," "potential," "continue" and similar words, although some forward-looking statements are expressed differently.  You should be aware that the forward-looking statements included herein represent management's current judgment and expectations, but our actual results, events and performance could differ materially from those expressed or implied by forward-looking statements.  We do not intend to update any of these forward-looking statements or publicly announce the results of any revisions to these forward-looking statements, other than as is required under U.S. federal securities laws.  Our business is subject to numerous risks and uncertainties, including those relating to fluctuations in our operating results; our substantial dependence on developing new products and achieving design wins; our dependence on a few large customers for a substantial portion of our revenue; a loss of revenue if contracts with the United States government or defense and aerospace contractors are canceled or delayed or if defense spending is reduced; our dependence on third parties; risks related to sales through distributors; risks associated with the operation of our manufacturing facilities; business disruptions; poor manufacturing yields; increased inventory risks and costs due to timing of customer forecasts; our inability to effectively manage or maintain evolving relationships with platform providers; risks from international sales and operations; economic regulation in China; changes in government trade policies, including imposition of tariffs and export restrictions; our ability to implement innovative technologies; underutilization of manufacturing facilities as a result of industry overcapacity; we may not be able to borrow funds under our credit facility or secure future financing; we may not be able to generate sufficient cash to service all of our debt; restrictions imposed by the agreements governing our debt; volatility in the price of our common stock; damage to our reputation or brand; fluctuations in the amount and frequency of our stock repurchases; our acquisitions and other strategic investments, including our recent acquisitions of Active-Semi International, Inc. and Cavendish Kinetics Limited, could fail to achieve financial or strategic objectives; our ability to attract, retain and motivate key employees; our reliance on our intellectual property portfolio; claims of infringement of third-party intellectual property rights; security breaches and other similar disruptions compromising our information; theft, loss or misuse of personal data by or about our employees, customers or third parties; warranty claims, product recalls and product liability; and risks associated with environmental, health and safety regulations and climate change.  These and other risks and uncertainties, which are described in more detail in Qorvo's most recent Annual Report on Form 10-K and in other reports and statements filed with the Securities and Exchange Commission, could cause actual results and developments to be materially different from those expressed or implied by any of these forward-looking statements.

Primary Logo




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us
ShareCG™ is a trademark of Internet Business Systems, Inc.

Report a Bug Report Abuse Make a Suggestion About Privacy Policy Contact Us User Agreement Advertise