MEMS-based 4604HT offers reliable, accurate measurement in harsh environment

Hampton, Va. August 2013 – Measurement Specialties (NASDAQ: MEAS), an expert in sensor design and manufacturing, now offers a  robust, DC-response accelerometer that operates in temperatures from -55°C to +170°C.  The new MEMS-based 4604HT features an amplified output as well as critical dampening to a -80 dB/decade response attenuation for excellent high frequency signal suppression and improved measurement accuracy.

The signal-conditioned unit offers an expansive dynamic range from ±2 g’s to ±200 g’s for a variety of onboard monitoring applications needing a low-cost, high performance sensor. Its high-g shock protection via integral over-range stops makes the 4604HT ideal for flight testing, road vehicle testing and performance testing as well as for flutter and nacelle vibrations and down hole monitoring. 

The accelerometer also includes integral strain relief, further enhancing measurement accuracy.  Typical parameters at ±2 g’s include sensitivity of 1,000 mV/g, a frequency response of 0-200 Hz and residual noise of 600 microvolts rms.

Excitation voltage of the new 4604HT is 8 Vdc to 18 Vdc and excitation current is less than 5 mA.  Thermal sensitivity shift is ±4% over the full temperature range. The sensor comes in a hermetically-sealed anodized aluminum housing with an epoxy seal rated to IP65. 

For more information, email  t&m@meas-spec.com or visit 
http://www.meas-spec.com/product/Vibration/4604HT.aspx.

For high res download and full text:
http://www.simongroup.com/PressRoom/press-release.php?Job=MEA-A-3339

UPCOMING TRADESHOW: International Fair for Measurement Instrumentation & Automation;August 27-30, 2013; Beijing, China.

READER SERVICE INQUIRIES:  Please direct all product inquiries to Bob Arkell, NA Marketing Manager;  Email Contact; 760-466-7614.

EDITOR'S NOTE:  Measurement Specialties, Inc. (NASDAQ: MEAS) designs and manufactures sensors and sensor-based systems to precisely and cost-effectively measure a number of physical characteristics in several markets from military and defense to medical, consumer and industrial. 

By accurately measuring areas such as pressure, temperature, position, level, tilt, force, vibration, torque, humidity, fluid properties, mass airflow and photo optics, our sensors enhance product functionality, efficiency and safety.

Our devices are embedded by original equipment manufacturers (OEMs) or used as stand-alone sensors for test and measurement to provide critical monitoring, feedback and control input.  MEAS also offers extensive sensor customization services ranging from special calibrations and connectors to custom label designs.



Contact: 

The Simon Group, Inc. 
Beth Smith or Joanna Puglisi-Barley
Phone: (215) 453-8700
E-mail:  Email Contact