"In April of 2013, we announced meeting TSMC9000 requirements for TSMC 180nm BCD Gen 1," said Tom Schild, Sidense VP of Sales and Marketing. "Providing support for both Gen 1 and Gen 2 reflects Sidense's commitment to its customers, TSMC and the ever-growing requirement for the BCD process."
Sidense Automotive Grade 1T-OTP macros completed full qualification for High-Temperature Operating Life (HTOL) at -40 degrees C to 150 degrees C and Data Retention Storage Life (DRSL) to 2000 hours at 150 degrees C. This level of qualification was completed to support customers requiring devices to conform to AEC-Q100 Grade 0 specifications and provide data retention over the full operating temperature range, at full duty cycle, for more than 10 years.
Macros are available in a comprehensive range of off-the-shelf configurations supporting small densities of 256 bits for configuration and trim applications, up to 256 Kbits per macro for code storage and multiple NVM uses. Automotive Grade 1T-OTP provides many advantages, including small footprints to minimize cost, field-programmability, configurations with word widths up to 128 bits and fast read access to allow executing code from OTP for many applications.
About Sidense Corp.
Sidense Corp. provides very dense, highly reliable and secure non-volatile one-time programmable (OTP) Logic Non-Volatile Memory (LNVM) IP for use in standard-logic CMOS processes. The Company, with over 120 patents granted or pending, licenses OTP memory IP based on its innovative one-transistor 1T-Fuse™ bit cell, which does not require extra masks or process steps to manufacture. Sidense 1T-OTP macros provide a better field-programmable, reliable and cost-effective solution than flash, mask ROM, eFuse and other embedded and off-chip NVM technologies for many code storage, encryption key, analog trimming and device configuration uses.
Over 120 companies, including many of the top fabless semiconductor manufacturers and IDMs, have adopted Sidense 1T-OTP as their NVM solution for more than 360 designs. Customers are realizing outstanding savings in solution cost and power consumption along with better security and reliability for applications ranging from mobile and consumer devices to high-temperature, high-reliability automotive and industrial electronics. The IP is offered at and supported by all top-tier semiconductor foundries and selected IDMs. Sidense is headquartered in Ottawa, Canada with sales offices worldwide. For more information, please visit www.sidense.com.
Add to Digg Bookmark with del.icio.us Add to Newsvine
Media Contacts: Susan Cain Cain Communications for Sidense Tel: 408-393-4794 Email: Email Contact Jim Lipman Sidense Tel: 925-606-1370 Email: Email Contact