Selected from more than 200 submitted concepts, the winning design will inspire the full-size Local Motors prototype vehicle that will be printed at IMTS in September 2014
PHOENIX — (BUSINESS WIRE) — June 5, 2014 — Local Motors, Inc. is excited to announce the winners of the first 3D Printed Car Design Challenge that was launched in April to uncover concepts that will inform and influence the vehicle that will be printed live at IMTS – The International Manufacturing Technology Show 2014 in Chicago, Illinois, September 8-13, 2014. More than 200 entries, representing submissions from 30+ countries around the globe, were submitted during the six-week challenge. After a weeklong voting period and review of all entries by an independent panel of expert judges, a total of seven designs were selected as winning concepts.
Winning design concept - Strati - from the Local Motors 3D Printed Car Design Challenge. Created by Michele Anoe from Turin, Italy. (Photo: Business Wire)
The winning concept, Strati, created by Michele Anoé of Italy, will highly inspire the full-size 3D printed prototype. “It’s simple and clean, with character,” said challenge judge and MakerBot CEO Bre Pettis. “It has a nice style that really hangs together.” Lonnie Love, Group Leader, Robotics and Manufacturing Systems Research at Oak Ridge National Laboratory, added, “Michele’s design offers an excellent balance between innovation, complexity and practicality. It has good 3D lines and the retractable roof is really cool.”
Michele will receive a $5,000 cash award for his submission and will be invited to see his concept manufactured live in AMT’s Emerging Technology Center, Booth N-650, at the IMTS Show this September.
“There are three major challenges facing the auto industry today: part count, weight, and the initial cost of tooling when creating and iterating on vehicles. The hybrid Direct Digital Manufacturing process stands to address all three of these,” said Jay Rogers, Local Motors CEO. “When these hurdles are removed, we open the door to an exciting new era in automotive design and manufacturing possibilities.”
Six additional concepts were recognized for their innovation and popularity among the members of Local Motors’ global community. Some aspects of these designs may also be incorporated into the final prototype. The designers of each of these concepts will receive a $1,000 cash award from Local Motors.
A favorite from the beginning, Internal Strut Frame has an innovative design that uses vertical struts to support the upper surfaces, saving weight and making a sturdy frame/body. This concept was selected as the “community favorite” by members of Local Motors’ global community.
Also employing an innovative use of vertical structures to support external surfaces, catering to the inability of current 3D printing processes to bridge horizontal gaps, this multi-layer design was described as “very futuristic” by judge Douglas K. Woods, President, AMT – The Association For Manufacturing Technology. “This design really has the ‘wow’ factor, like something Batman or the Green Hornet would drive.”
Creative structural supports – including the spine down the center – and a clean passenger compartment are defining elements of this concept. In his judges notes, Paul R. Warndorf, Vice President, Manufacturing Technology, AMT, noted, "By incorporating simplicity and innovation via smart design and smart deployment of vehicle features, the 3DPCX brings the openness of the road inside the vehicle."
The LM Supernova incorporates interior design elements that are not only innovative and well thought out, but highly functional and lightweight. This is a great example of using good design and engineering to create a truly innovative vehicle. According to Woods, “The Supernova looks tough and fast, like a Formula 1 racecar.”
The Mirage took an innovation award for incorporating layers to create 3D printed “crumple zones,” which is not only unique, but also very innovative. Taking into account how the technology could be used, the Mirage concept “is a great looking car, offering some solid suggestions for what can be achieved with additive manufacturing,” said Rick Neff, Manager, Market Development for Cincinnati Incorporated.
“A tribute to the minimalist in all of us, the e-Spider merges the efficiency of a smart car with the effectiveness of a desert dune buggy,” said AMT’s Warndorf. The e-Spider’s roof design and windshield connections, as well as the incorporation of shielding accessories to allow for use in severe weather, showed a great combination of innovation and practicality.
About the partnership with Local Motors and this endeavor to deliver the world’s first 3D printed vehicle prototype, Peter R. Eelman, Vice President, Exhibitions & Communications, AMT, had this to say, “This continues the legacy of Local Motors bringing disruptive technology to IMTS. We started this journey in 2010 when Jay Rogers appeared at AMT’s Annual Meeting, and from that a partnership emerged to build the Rally Fighter on the show floor at IMTS 2012. We are excited to showcase the winner’s innovative design and demonstrate to the industry this new process of manufacturing a car with a substantial structure being 3D printed on-site in AMT’s Emerging Technology Center at IMTS 2014.”
Multimedia
Click to view the Winners Announcement Video or copy and paste the following link into your browser: http://youtu.be/mhNfNyXVGag.
About Local Motors
From bytes-to-bits, the Local Motors platform empowers anyone to design, build, and sell the world’s coolest machines. The platform combines global co-creation and local micro-manufacturing to bring hardware innovations to market at unprecedented speed. The Company stewards a global co-creation community made up of hobbyist innovators and professionals. This community is comprised of enthusiasts, designers, engineers, and makers. The Company operates a growing global network of microfactories, where innovators create amazing products and consumers come to marvel and shop. We make the coolest machines together. Learn more at localmotors.com.
About AMT – The Association For Manufacturing Technology
Founded in 1902 as the National Machine Tool Builders' Association, AMT supports and promotes the U.S. manufacturing technology industry. The association provides U.S. builders of manufacturing systems with the latest information on technical developments, trade and marketing opportunities, and economic issues. It also gathers and disseminates information about world markets, promotes its members' products in those markets, and acts as a representative on manufacturing technology matters to governments and trade organizations throughout the world.
About IMTS – International Manufacturing Technology Show
The largest and longest running manufacturing technology trade show in the United States is held every other year at McCormick Place in Chicago, Ill. IMTS 2014 will run September 8-13. IMTS is ranked among the largest trade shows in the world. Recognized as one of the world's preeminent stages for introducing and selling manufacturing equipment and technology, IMTS attracts more than 100,000 visitors from every level of industry and more than 119 countries. IMTS is owned and managed by AMT – The Association For Manufacturing Technology. www.IMTS.com
Photos/Multimedia Gallery Available: http://www.businesswire.com/multimedia/home/20140605005379/en/
Contact:
Local Motors, Inc.
Amy Romano
Director of Strategic Marketing,
Communications & PR
480-371-0575 (mobile)
Email Contact
localmotors.com