5th June, 2015, Tokyo, Japan — Gexcel and SGS Gexcel Japan have just attended the FARO 3D User Conference Asia Pacific 2015/Japan where they have presented 4D Inspector® (to remotely control and to run an automatic 3D monitoring project): the solution able to transform the Focus3D in a 3D automatic monitoring system.
Several demos of the powerful new LineUp ® Pro target-less registration tool have created large interest and surprise among surveyors and technicians present at the Conference.
JRC 3D Reconstructor - LineUp® Pro is so easily able to perfectly align tens of scans without any geometry constrain, in a so short elaboration time, using only 20% of scan overlap, that the alignment problems can be considered as solved.
About Gexcel
Gexcel Srl has a rich history spanning more than 10 years of proven fully featured lidar and imagery analysis software packages with the JRC 3D Reconstructor®, completely compatible with all terrestrial, mobile and airborne scanners from manufacturers such as Faro, Optech, Riegl, Stonex, Topcon, Trimble and Z+F. Gexcel Srl was established in 2007 from the academic know-how of the University of Brescia and the applied research achievements of the European Joint Research Centre (JRC), located in Ispra (Italy). Gexcel Srl is proud to support all major standard formats such as the ASTM E57 and LAS.
Contact:
arch. Giorgia Rossi
International Sales Manager
Gexcel Srl
+39 030 65 95 001
Email Contact