Toshiba Launches H Bridge Driver IC for Low-Voltage (2.5V) Drive

TOKYO — (BUSINESS WIRE) — March 28, 2016Toshiba Corporation's (TOKYO:6502) Semiconductor & Storage Products Company today announced the launch of “TC78H620FNG”, an addition to its line-up of H bridge[1] driver ICs for the DC brushed motors and stepping motors used in the mobile battery-drive equipment (cameras and small printers) and home appliances. Mass production starts today.

This Smart News Release features multimedia. View the full release here: http://www.businesswire.com/news/home/20160328005315/en/

Toshiba: "TC78H620FNG", a new H bridge driver IC for DC brushed motors and stepping motors. (Photo:  ...

Toshiba: "TC78H620FNG", a new H bridge driver IC for DC brushed motors and stepping motors. (Photo: Business Wire)

The new product adopts a four-port interface control using the PHASE signal and the ENABLE signal. The existing product, "TC78H610FNG" with standard interfaces, needed four ports for full step control of the stepping motor. The new product "TC78H620FNG" secures control with three ports. With the high functionality of the set, there are cases where the lack of control ports of the MCU is an issue. This product will contribute to solving the problem.

The new product is compatible with low-voltage drive (for motor drive: 2.5V and above, for logic control: 2.7V and above), and thus suitable for mobile devices (cameras and small printers) with a 3.7V lithium-ion battery drive.

Main Features

  • The PHASE and ENABLE interface signals secure full step drive of the stepping motor by three control ports.
  • It can control two DC brushed motors or one stepping motor.
  • A small package (SSOP16) downsizes the mounting area and reduces the cost of the board.
  • Abnormality detection functions (over current detection, thermal shutdown circuit, and under voltage lockout circuit) are incorporated to improve safety in driving the motor.
  • Consumption current of 0μA (typ.) in standby mode is realized.
  • Shoot-through current protection is incorporated. The motor can be controlled without considering the dead time in switching output ON and OFF.
 

Main Specifications

Product name   TC78H620FNG (New product)   TC78H610FNG
Power supply voltage
(Operation range)

Power supply for motor drive: 2.5 to 15V
Logic power supply: 2.7 to 5.5V

Power supply for motor drive: 2.5 to 15V
Logic power supply: 2.7 to 5.5V
Output current
(Absolute maximum rating)

1.0A

1.0A

Drive motor

*Stepping motor

    Full step: Controllable 3-ports
    Half step: Controllable 4-ports

*DC brushed motor

    It can drive two motors.

*Stepping motor

    Full step: Controllable 4-ports
    Half step: Controllable 4-ports

*DC brushed motor

    It can drive two motors.

    Compatible with brake mode

Output ON resistance
(Sum of Upper and Lower)
1.2Ω (typ.) 1.2Ω (typ.)
Detection circuit 1. Over current detection (ISD) circuit

2. Thermal shutdwon (TSD) circuit

3. Under voltage lockout (UVLO) circuit

1. Over current detection (ISD) circuit

2. Thermal shutdwon (TSD) circuit

3. Under voltage lockout (UVLO) circuit

Package   SSOP16   SSOP16
 

1 | 2  Next Page »



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us
ShareCG™ is a trademark of Internet Business Systems, Inc.

Report a Bug Report Abuse Make a Suggestion About Privacy Policy Contact Us User Agreement Advertise