The latest release of HES-DVM™ provides a simulation acceleration flow, providing significant RTL simulation speed-up of designs targeting Microchip FPGA devices.
HENDERSON, Nev. — (BUSINESS WIRE) — November 3, 2020 — Aldec, Inc., a pioneer in mixed-HDL language simulation and hardware-assisted verification for ASIC and FPGA designs, has introduced a HES-DVM™ simulation acceleration flow for Microchip’s PolarFire, SmartFusion2 and RTSX/RTAX FPGA designs using Aldec’s HES-MPF500-M2S150 prototyping board.
“Aldec has a long history of developing hardware assisted verification solutions, with our first HES board and simulation acceleration platform released 20 years ago,” said Zibi Zalewski, General Manager of Aldec’s Hardware Division. “We also have a proven track record of developing Microsemi/Microchip FPGA prototyping boards, and it is great that we can combine these areas of expertise to meet today’s verification challenges.”
Simulation acceleration techniques have been around for about two decades, but most products are based on FPGAs from one or two leading FPGA vendors. Usually, it does not matter which FPGA family is used on the simulation acceleration board if the design is coded using synthesizable RTL.
However, growing design complexity, along with shrinking design cycles and shorter time to market, are increasingly taking engineers down the path of re-usable IP blocks from the FPGA vendor, instead of developing RTL code. The drawback is that the designs become dependent on the given FPGA technology, and the re-usable IP blocks usually require far more computational power to simulate than pure RTL code.
Aldec’s HES-DVM overcomes the above challenges and removes a key verification bottleneck. With the latest release of this powerful EDA tool, users of PolarFire, RTAX/RTSX and SmartFusion2 devices wishing to take advantage of Microchip IPs can accelerate their RTL simulations using Aldec’s HES-MPF500-M2S150, which features the largest devices available in both families.
Zalewski concludes: “During the 20 years since we introduced HES, the world of digital designs has changed significantly and the need for simulation speeds to increase has grown along with not only design complexity but also the size and features of FPGAs. Our latest release of HES-DVM will be of great benefit to designers using Microchip IPs.”
The 2020.09 software release of HES-DVM is available immediately. To learn more or to evaluate HES-DVM, please visit www.aldec.com, e-mail sales@aldec.com, call +1 (702) 990-4400, or contact one of Aldec’s worldwide distribution partners.
About HES™ Prototyping
Aldec offers a portfolio of HES™ prototyping boards based on the largest Xilinx FPGAs of the Virtex UltraScale Plus, UltraScale and Virtex-7 families, Microsemi PolarFire and SmartFusion2. The boards are architected to allow for easy expansion using BPX backplane and standardized FMC and BPX daughter card connectors.
About HES-DVM™
HES-DVM™ is a fully automated and scalable hybrid verification environment for SoC and ASIC designs. Utilizing the latest co-emulation standards like SCE-MI or TLM and the newest FPGA technology, hardware and software design teams obtain early access to the hardware prototype of the design. HES-DVM is used in labs worldwide for all kinds of emulation and physical prototyping tasks including Simulation Acceleration, Hybrid Virtual Prototypes, In-Circuit Emulation, Software Validation and Prototyping.
About Aldec
Established in 1984, Aldec is an industry leader in Electronic Design Verification and offers a patented technology suite including: RTL Design, RTL Simulators, Hardware-Assisted Verification, SoC and ASIC Prototyping, Design Rule Checking, CDC Verification, IP Cores, High-Performance Computing Platforms, Embedded Development Systems, Requirements Lifecycle Management, DO-254 Functional Verification and Military/Aerospace solutions. www.aldec.com
Aldec is a registered trademark of Aldec, Inc. All other trademarks or registered trademarks are the property of their respective owners.
View source version on businesswire.com: https://www.businesswire.com/news/home/20201103005632/en/
Contact:
Media Contact:
Richard Warrilow
Declaration Limited
T: +44 (0)1522 789 000
richardw@aldec.com