JASPAR was established in 2004 to facilitate the adoption of new automotive related technologies throughout Japan. The organization helps improve development efficiency and ensures reliability through standardization and sharing of sophisticated electronic automotive software and networks. It does this by providing common specification guidelines that can be referenced by the country's automobile OEMs and their Tier 1 partners.
JASPAR administered a comprehensive suite of EMC tests on the Valens VA7031 serializer and VA7044 deserializer chipsets for induction noise, TEM cell, antenna irradiation, BCI, antenna irradiation radar band, wireless device, conductive noise, and radiation noise. The tests were conducted according to the JASPAR Next-Generation High-Speed LAN Evaluation Standards Ver. 3.0 (ST-HN-3). The recommended circuit specification, A-PHY, has been published as JASPAR Recommended Multi-gigabit Electric Circuit Specification Ver. 1.0 (ST-HN-10).
"As car companies integrate next-generation ADAS and autonomous systems with sensors requiring ever-higher bandwidth, EMC is becoming increasingly important," said Hideki Goto, Chairperson of the Next Generation High-Speed Network Working Group at JASPAR and Group Manager at Toyota Motor Corporation. "Our EMC testing has shown that MIPI A-PHY is one of the most resilient technologies for electromagnetic interference."
"At Valens Semiconductor, we take pride in our unique offering of ultra-high bandwidth long reach connectivity alongside an unprecedented EMC performance," said Gideon Kedem, SVP and Head of Automotive at Valens Semiconductor. "JASPAR's recommendation is a seal of approval for our VA7000 chipsets as well as for the MIPI A-PHY standard as a whole. The successful testing will give automotive OEMs – not just in Japan but around the world – even more confidence in using our technology to protect vulnerable, safety-critical links. While other solutions cannot meet the industry's growing bandwidth requirements without compromising on EMC resilience, only A-PHY will allow OEMs to safely enhance their ADAS architecture."
MIPI A-PHY, defined by the MIPI Alliance, is the first standardized, asymmetric, long-reach serializer-deserializer (SerDes) physical layer specification targeted for advanced driver-assistance systems (ADAS), autonomous driving systems (ADS), in-vehicle infotainment (IVI) displays and other surround-sensor applications (e.g., cameras, lidar, radar). It offers OEMs unprecedented bandwidth and link distance, while guaranteeing an industry-low Packet Error Rate (PER) of 10-19 – orders of magnitude lower than competing solutions used in cars today. The Valens VA7000 chipsets are the first on the market to comply with the A-PHY standard.
About Valens Semiconductor
Valens Semiconductor pushes the boundaries of connectivity by enabling long-reach, high-speed video and data transmission for the Audio-Video and Automotive industries. Valens' HDBaseT technology is the leading standard in the Audio-Video market with tens of millions of Valens' chipsets integrated into thousands of products in a wide range of applications. Valens' Automotive chipsets are deployed in systems manufactured by leading customers and are on the road in vehicles around the world. Valens Semiconductor is a key enabler of the evolution of ADAS and autonomous driving and its advanced technology is the basis for the MIPI A-PHY standard for high-speed in-vehicle connectivity.
For more information: www.valens.com
Forward-Looking Statements
This press release includes "forward-looking statements" within the meaning of the "safe harbor" provisions of the United States Private Securities Litigation Reform Act of 1995. Forward-looking statements may be identified by the use of words such as "estimate," "plan," "project," "forecast," "intend," "will," "expect," "anticipate," "believe," "seek," "target" or other similar expressions that predict or indicate future events or trends or that are not statements of historical matters. These forward-looking statements include, but are not limited to, statements regarding our anticipated future results, including financial results, currency exchange rates, and contract wins, and future economic and market conditions. These statements are based on various assumptions, whether or not identified in this press release, and on the current expectations of Valens Semiconductor's ("Valens") management and are not predictions of actual performance. These forward-looking statements are provided for illustrative purposes only and are not intended to serve as, and must not be relied on by any investor as, a guarantee, an assurance, a prediction or a definitive statement of fact or probability. Actual events and circumstances are difficult or impossible to predict and will differ from assumptions. Many actual events and circumstances are beyond the control of Valens Semiconductor.
These forward-looking statements are subject to a number of risks and uncertainties, including the cyclicality of the semiconductor industry; the effects of health epidemics, such as the recent global COVID-19 pandemic; the impact of the global pandemic caused by COVID-19 on our customers' budgets and on economic conditions generally, as well as the length, severity of and pace of recovery following the pandemic; competition in the semiconductor industry, and the failure to introduce new technologies and products in a timely manner to compete successfully against competitors; if Valens fails to adjust its supply chain volume due to changing market conditions or fails to estimate its customers' demand; disruptions in relationships with any one of Valens' key customers; any difficulty selling Valens' products if customers do not design its products into their product offerings; Valens' dependence on winning selection processes; even if Valens succeeds in winning selection processes for its products, Valens may not generate timely or sufficient net sales or margins from those wins; sustained yield problems or other delays in the manufacturing process of products; our ability to effectively manage, invest in, grow, and retain our sales force, research and development capabilities, marketing team and other key personnel; our ability to timely adjust product prices to customers following price increase by the supply chain; our ability to adjust our inventory level due to sudden reduction in demand due to inventory buffers accrued by customers; our expectations regarding the outcome of any future litigation in which we are named as a party; our ability to adequately protect and defend our intellectual property and other proprietary rights; the market price and trading volume of the Valens ordinary shares may be volatile and could decline significantly; political, economic, governmental and tax consequences associated with our incorporation and location in Israel; and those factors discussed in Valens' Form 20-F filed with the SEC on March 2, 2022 under the heading "Risk Factors," and other documents of Valens filed, or to be filed, with the SEC. If any of these risks materialize or our assumptions prove incorrect, actual results could differ materially from the results implied by these forward-looking statements. There may be additional risks that Valens does not presently know or that Valens currently believes are immaterial that could also cause actual results to differ from those contained in the forward-looking statements. In addition, forward-looking statements reflect Valens' expectations, plans or forecasts of future events and views as of the date of this press release. Valens anticipates that subsequent events and developments may cause Valens' assessments to change. However, while Valens may elect to update these forward-looking statements at some point in the future, Valens specifically disclaims any obligation to do so. These forward-looking statements should not be relied upon as representing Valens' assessment as of any date subsequent to the date of this press release. Accordingly, undue reliance should not be placed upon the forward-looking statements.
Press Contact
Yoni Dayan
Head of Communications
Valens Semiconductor Ltd.
Email Contact
Investor Contacts:
Daphna Golden
Vice President Investor Relations
Valens Semiconductor Ltd.
Email Contact
Moriah Shilton
Financial Profiles, Inc.
Email Contact
Logo - https://mma.prnewswire.com/media/1517334/Valens_Logo.jpg
View original content:
https://www.prnewswire.com/news-releases/following-successful-testing-of-valens-semiconductor-chipsets-leading-japanese-automotive-association-jaspar-validates-the-mipi-a-phy-standard-301694507.html
SOURCE Valens Semiconductor
| Contact: |
| Company Name: Valens Semiconductor
US: +1 310-622-8230 Financial data for Valens Semiconductor |
