[ Back ]   [ More News ]   [ Home ]
PEAK Surgical Uses SolidWorks Software to Develop Low-Temperature Surgical Cutting and Coagulation Tools

CONCORD, Mass.—(BUSINESS WIRE)—August 11, 2008— Dassault Systèmes SolidWorks Corp. (DS SolidWorks) (Nasdaq: DASTY; Euronext Paris: #13065, DSY.PA), a world leader in 3D solutions, today announced that a new surgical device designed in SolidWorks ® 3D CAD software provides the precision of a scalpel and the bleeding control of traditional electrosurgery without causing heat damage to surrounding tissues. PEAK Surgical Inc.s PEAK PlasmaBlade 4.0, a low-temperature surgical cutting and coagulation tool that is part of the PEAK® Surgery System, was recently granted clearance by the U.S. Food and Drug Administration for use in general surgery.

The PEAK Surgery System also includes the PULSAR generator, which delivers plasma (energy) in short controlled bursts to the PlasmaBlade. Results of preclinical trials have shown that surgical incision healing and strength were significantly improved with the PlasmaBlade compared with traditional electrosurgical devices and that the PlasmaBlade was associated with minimal scarring and inflammation. PEAK Surgical standardized on SolidWorks software to incorporate ample ergonomic and functional feedback from several surgeons into the final design of the PlasmaBlade.

Form and function are critical for surgical devices, and innovation begins with direct input from those who will be using them, said Paul Davison, vice president of research and development at California-based PEAK Surgical. SolidWorks saved us research and development time because it allowed us to rapidly fabricate multiple prototypes and trial them in parallel with surgeons. The software enabled us to easily build feedback into our products to ensure we achieved performance objectives.

SolidWorks surfacing capabilities enabled PEAK Surgical engineers to make slight changes to the grip of the PlasmaBlade to ensure the device felt right to surgeons. Advanced sheet metal tools allowed engineers to accurately model parts so they could see how they would be made and how they would look. SolidWorks allowed us to keep manufacturability and ergonomics in mind as we constantly refined the system throughout product development, said Scott Taylor, senior research and development engineer at PEAK Surgical.

PEAK Surgical used SolidWorks Workgroup PDM software to ensure version control while enabling engineers to work on different parts of the same design at the same time. PEAK Surgical engineers also used SolidWorks SimulationXpress to ensure the tip of the PlasmaBlade could stand up to a variety of different stresses.

Developing new medical technologies makes a profound difference in peoples lives, said Jeff Ray, CEO at DS SolidWorks. PEAK Surgical is yet another example of an upstart company that has made an innovative concept a beneficial medical reality using SolidWorks software.

Peak Surgical relies on authorized SolidWorks reseller Hawk Ridge Systems for ongoing software training, implementation, and support.

About Peak Surgical, Inc.

PEAK Surgical, Inc. is a medical device company that has developed the PEAK® Surgery System, a new tissue dissection system based on a proprietary technology that represents an evolutionary leap in the advancement of radiofrequency surgical technologies. The PEAK Surgery System consists of the PEAK PlasmaBlade 4.0, a disposable cutting tool that offers the exacting control of a scalpel and the bleeding control of traditional electrosurgery without the extensive collateral damage, and the PULSAR Generator, which supplies pulsed plasma radiofrequency energy to the PlasmaBlade. The PEAK Surgery System is cleared for use in general surgery in the United States. The company is exploring the applicability of this technology across additional surgical fields, including cardiothoracic, gynecologic, plastic and reconstructive, and neurosurgery. For more information, please visit www.peaksurgical.com.

About Hawk Ridge Systems

Hawk Ridge Systems is one of the largest SolidWorks CAD VARs in North America. Founded in 1995 in the San Francisco Bay Area, HRS has 11 offices located throughout California, Oregon, Washington, and Vancouver, B.C. Hawk Ridge has 30 Certified SolidWorks Engineers on staff and maintains a 2:1 ratio of engineers to salespeople more than double the industry norm. This heavy investment in customer support, plus an array of industry-leading products including SolidWorks, SolidWorks Simulation, and SolidWorks PDM products has attracted thousands of West Coast customers in industries ranging from fiber optic networking products, semiconductor equipment, medical devices, consumer products, automotive, and aerospace. For more information visit www.hawkridgesys.com.

About Dassault Systèmes SolidWorks Corp.

Dassault Systèmes SolidWorks Corp., a Dassault Systèmes S.A. (Nasdaq: DASTY, Euronext Paris: #13065, DSY.PA) company, develops and markets software for design, analysis, and product data management. It is the leading supplier of 3D CAD technology, giving teams intuitive, high-performing software that helps them design better products. For the latest news, information, or an online demonstration, visit the companys Web site ( www.solidworks.com) or call 1-800-693-9000 (outside of North America, call +1-978-371-5000).

About Dassault Systèmes

As a world leader in 3D and Product Lifecycle Management (PLM) solutions, Dassault Systèmes brings value to more than 100,000 customers in 80 countries. A pioneer in the 3D software market since 1981, Dassault Systèmes develops and markets PLM application software and services that support industrial processes and provide a 3D vision of the entire lifecycle of products from conception to maintenance to recycling. The Dassault Systèmes portfolio consists of CATIA for designing the virtual product - SolidWorks for 3D mechanical design - DELMIA for virtual production - SIMULIA for virtual testing - ENOVIA for global collaborative lifecycle management, and 3DVIA for online 3D lifelike experiences. Dassault Systèmes is listed on the Nasdaq (DASTY) and Euronext Paris (#13065, DSY.PA) stock exchanges. For more information, visit http://www.3ds.com.

SolidWorks is a registered trademark of Dassault Systèmes SolidWorks Corp. Other brand and product names are trademarks of their respective owners. Copyright (c) 2008 Dassault Systèmes SolidWorks Corp.

Click here to listen to a podcast interview with Paul Davison.

You can subscribe to SolidWorks podcasts through iTunes, My Yahoo and sign up to an RSS feed linking you to new podcasts.

Bookmark with de.li.cious

Submit this story to digg

Submit this story to slashdot

Technorati tags SolidWorks, CAD, 3D CAD, MCAD, Design, Tech, Autodesk, AutoCAD, SolidEdge



Contact:

Dassault Systèmes SolidWorks Corp.
Nancy Buchino, 978-318-5262
Email Contact
www.solidworks.com
or
Beaupre & Co.
Darby Johnson, 603-559-5809
Email Contact
www.beaupre.com