[ Back ]   [ More News ]   [ Home ]
National Semiconductor Introduces Industry's First TRIAC Dimmable LED Driver With Both Full-range and Flicker-free Dimming

Constant-current Controller Extends LED Lifetime with Patent-pending Control Architecture

WASHINGTON, Feb. 17 /PRNewswire-FirstCall/ -- APPLIED POWER ELECTRONICS CONFERENCE -- National Semiconductor Corp. (NYSE: NSM) today introduced a new constant-current controller that enables off-line, uniform, flicker-free dimming of high-brightness light-emitting diodes (LEDs) with a conventional TRIode for Alternating Current (TRIAC) forward or reverse phase-control wall dimmer. The LM3445 TRIAC dimmable LED driver enables a full 100:1 range of dimming capability and can maintain greater than 1A of constant current to large strings of LEDs in a variety of residential, architectural, commercial and industrial applications.

(Photo: http://www.newscom.com/cgi-bin/prnh/20090217/AQTU502)

The LM3445 TRIAC dimmable LED driver maximizes the light output for systems while maintaining ENERGY STAR(R) power factor requirements in a typical application, positioning it among National's PowerWise(R) family of energy-efficient products. The new driver will be demonstrated in National's booth #426 at the Applied Power Electronics Conference (APEC) 2009 conference in Washington, D. C., from Feb. 15 to 18.

Today's TRIAC wall dimmers are designed to interface with a resistive load such as incandescent or halogen light bulbs. Since an LED bulb does not appear as a resistive load to the TRIAC wall dimmer, dimming an LED bulb using a conventional TRIAC wall dimmer does not yield optimal dimming performance. LED drivers available today cause either a 120 Hz flicker of the LEDs or do not enable the full 100:1 dimming range. National's LM3445 overcomes this challenge by translating the TRIAC-chopped waveform to a DIM signal and decoding it for a full-range of uniform, flicker-free dimming. The driver's patent-pending control architecture maintains constant ripple through the LEDs, which extends the life of the LEDs. To view a demonstration online of the LM3445 and learn more about LED lighting, visit http://www.national.com/led.

National's LM3445 LED driver enables direct LED bulb replacement of existing incandescent or halogen bulb systems connected to standard TRIAC wall dimmers. In addition, the LM3445 allows master-slave operation, enabling control of multiple strings of LED bulbs.

A complete LED system featuring the LM3445 can be created in minutes with National's WEBENCH(R) LED Designer. To start a design, visit http://www.national.com/webench/led.

Technical Features of National's New LM3445 TRIAC Dimmable LED Driver

Offered in a 10-pin mini SOIC package, National's LM3445 is an adaptive constant off-time AC-DC buck (step-down) constant current controller that includes a TRIAC dimming decoder. The decoder allows wide-range LED dimming using standard TRIAC dimmers. The high-frequency capable architecture allows the use of small external passive components.

The LM3445 includes a bleeder circuit to ensure proper TRIAC operation by allowing current flow while the line voltage is low to enable proper firing of the TRIAC. A passive power factor correction circuit ensures good power factor by drawing current directly from the line for most of the cycle, and provides a constant positive voltage to the buck regulator. Additional features include thermal shutdown, current limit and under-voltage lockout.

For more information on the LM3445 or to order samples and an evaluation board, visit http://www.national.com/pf/LM/LM3445.html.

About National's WEBENCH LED Designer

With National's WEBENCH LED Designer suite of tools, engineers can configure a system with up to 60 LEDs in serial or parallel strings. With a single keystroke, the tool selects from hundreds of high brightness LEDs, matches an LED with one of National's PowerWise energy-efficient LED drivers and creates an optimized power supply circuit. The engineer can easily "dial-in" their size and efficiency requirements, and then simulate the circuit behavior under dynamic conditions, including start-up, steady state, pulse-width modulation dimming and line transient. After fine-tuning the system in just minutes, the 'BuildIt!' feature provides a complete bill of materials for the LED circuit and the ability to quickly ship a custom prototype kit containing the selected LED, PC board, driver IC and passive components.

    Availability and Pricing
    The LM3445 is available now and priced at $1.75 in 1,000-unit quantities.

About National Semiconductor

National Semiconductor creates energy-efficient analog and mixed-signal semiconductors. Its PowerWise products enable systems that consume less power, extend battery life and generate less heat. Headquartered in Santa Clara, Calif., National reported sales of $1.89 billion for fiscal 2008 which ended May 25, 2008. Additional company and product information is available at http://www.national.com.

National Semiconductor, WEBENCH and PowerWise are registered trademarks of National Semiconductor Corporation. ENERGY STAR is a trademark of the U.S. Environmental Protection Agency and the U.S. Department of Energy.

     Media Contact                       Reader Information
     Gayle Bullock                       Design Support Group
     National Semiconductor              National Semiconductor
     (408) 721-2033                      (800) 272-9959
     gayle.bullock@nsc.com               http://www.national.com

Web site: http://www.national.com//