[ Back ]   [ More News ]   [ Home ]
COADE CADWorx fieldPipe and CADWors fieldPipe for CloudWorx to be exhibited at daraTECH 2009 on February 23-25

HOUSTON—(BUSINESS WIRE)—February 25, 2009— COADE announced today that the software company will be presenting CADWorx fieldPipe for Leica fieldPro and a new product, CADWorx field Pipe for Leica CloudWorx, during the daraTECH 2009 Plant Asset Scanning Summit in Houston, Texas, on February 23-25. Jointly developed by COADE and Leica Geosystems, these products combine the accuracy of laser and the power of a plant design system all in one package, delivering those capabilities directly to those in the field.

When doing as-built work, one of the biggest challenges is not getting an accurate image of what exists in the plant, as would be produced by traditional laser scan models, but producing accurate intelligent models of the processes that exist or those that are to be connected or tied into. In the traditional approach, facilities are scanned and then back office work is conducted on the scan that typically produces an unintelligent model. CADWorx fieldPipe approaches this in two different ways. The first way, using CADWorx fieldPipe for Lieca fieldPro, is where the user employs a laser total station to pick discreet points in the design which are then fed to an intelligent plant design package that models the piping system while the operator is still in the field. The second method, using CADWorx fieldPipe for CloudWorx, allows users, who are working away from the field, to pick discreet points directly from existing scanned data to create intelligent plant models from which design deliverables can be easily produced. Information on these and other COADE products can be found at www.coade.com.

About COADE

COADE, Inc. is a provider of software for multiple plant design and engineering disciplines. COADE's aims are that design and engineering should share relevant information seamlessly, thereby maintaining accuracy and improving efficiency. COADE's product line conforms to those goals and includes: CAESAR II, the world's most widely used pipe stress analysis software; PV Elite for pressure vessel and heat exchanger design and analysis; CADWorx Plant Design Suite for intelligent plant design modeling, process schematics and automatic production of plant design deliverables; and TANK for the design and analysis of oil storage tanks. COADE, CAESAR II, CADWorx, PVElite, CodeCalc and TANK are registered trademarks or trademarks of COADE, Inc. For more information, visit www.coade.com.



Contact:

For COADE, Inc.
Gary Carson, 1-713-668-8550
Email Contact
or
COADE, Inc.
Vornel Walker, 1-281-890-4566