Based on Dassault Systèmes ENOVIA VPM, a 3D Digital Mock Up of the plane will support design activities from several thousands of designers, from Airbus and its suppliers. The aircraft composite structure design, developed on Dassault Systèmes CATIA Composite Part Design solution, can be revised by all parties involved, leading to improved engineering reactivity. The 3D Digital Mock-Up (DMU) is also going to be connected to Manufacturing Engineering (Dassault Systèmes DELMIA software) for an optimization of the manufacturing process and an end to end process from engineering to manufacturing.
The A350 XWB programme is focused on operational efficiency with a family of new-generation aircraft perfectly suited to the market’s changing needs in terms of size, range, passenger comfort and the environment. It will provide improved fuel efficiency, reduced emissions and lower noise levels during departure, cruise and arrival. This is why, managing the lifecycle of its A350 aircraft in a virtual 3D PLM environment, has been one of Airbus’ major objectives.
“Dassault Systèmes is supporting Airbus in its objective to improve manufacturing techniques and to increase collaborative innovation for sustainable business.” comments Etienne Droit, Executive Vice President, Dassault Systèmes. “Two years ago, Dassault Systèmes and Airbus agreed to have 3D as the master of the A350 definition and 3D reliable configured DMU to be the reference for any A350 designers and managers, to put in place Dassault Systèmes PLM solutions to support the wide Extended Enterprise ecosystem working to develop and produce A350, and to simplify and harmonize IT environment to be efficient in supporting these challenges: This is now a reality.”
“In today's interconnected world, it is even more critical for manufacturers to intensify their collaborative approach for smart product design and development. IBM and Dassault Systèmes have worked together to deliver an implementation that allows Airbus to collaborate more easily with partners and suppliers. This helps optimize operations globally and creates a leaner and faster model for product development”, stated Albert Bunshaft, vice president, IBM Product Lifecycle Management.
About Dassault Systèmes
As a world leader in 3D and Product Lifecycle Management (PLM) solutions, Dassault Systèmes brings value to more than 100,000 customers in 80 countries. A pioneer in the 3D software market since 1981, Dassault Systèmes develops and markets PLM application software and services that support industrial processes and provide a 3D vision of the entire lifecycle of products from conception to maintenance to recycling. The Dassault Systèmes portfolio consists of CATIA for designing the virtual product - SolidWorks for 3D mechanical design - DELMIA for virtual production - SIMULIA for virtual testing - ENOVIA for global collaborative lifecycle management, and 3DVIA for online 3D lifelike experiences. Dassault Systèmes’ shares are listed on Euronext Paris (#13065, DSY.PA) and Dassault Systèmes’ ADRs may be traded on the US Over-The-Counter (OTC) market (DASTY). For more information, visit http://www.3ds.com.
CATIA, DELMIA, ENOVIA, SIMULIA, SolidWorks and 3D VIA are registered trademarks of Dassault Systèmes or its subsidiaries in the US and/or other countries.
Contact:
Dassault Systèmes
Derek Lane (DS Americas), + 1 (818)
673-2243
Email Contact
or
CJ
Lin (DS AP), +86 21 3856 8039
Email Contact
or
Arnaud
Malherbe (DS EMEA), +33 (1) 61 62 87 73
Email Contact
or
Virginie
Blindenberg (DS EMEA), +33 (1) 61 62 84 21
Email Contact