3D Systems Reports Fourth Quarter and Full Year 2021 Financial Results

Listen via webcast: www.3dsystems.com/investor
Participate via telephone: 201-689-8345

A replay of the webcast will be available approximately two hours after the live presentation at www.3dsystems.com/investor.

Forward-Looking Statements

Certain statements made in this release that are not statements of historical or current facts are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause the actual results, performance or achievements of the company to be materially different from historical results or from any future results or projections expressed or implied by such forward-looking statements. In many cases, forward looking statements can be identified by terms such as “believes,” “belief,” “expects,” “may,” “will,” “estimates,” “intends,” “anticipates” or “plans” or the negative of these terms or other comparable terminology. Forward-looking statements are based upon management’s beliefs, assumptions and current expectations and may include comments as to the company’s beliefs and expectations as to future events and trends affecting its business and are necessarily subject to uncertainties, many of which are outside the control of the company. The factors described under the headings “Forward-Looking Statements” and “Risk Factors” in the company’s periodic filings with the Securities and Exchange Commission, as well as other factors, could cause actual results to differ materially from those reflected or predicted in forward-looking statements. Although management believes that the expectations reflected in the forward-looking statements are reasonable, forward-looking statements are not, and should not be relied upon as a guarantee of future performance or results, nor will they necessarily prove to be accurate indications of the times at which such performance or results will be achieved. The forward-looking statements included are made only as the date of the statement. 3D Systems undertakes no obligation to update or revise any forward-looking statements made by management or on its behalf, whether as a result of future developments, subsequent events or circumstances or otherwise, except as required by law.

Presentation of Information in this Press Release

3D Systems reports its financial results in accordance with GAAP. Management also reviews and reports certain non-GAAP measures, including: non-GAAP revenue, non-GAAP Gross profit, non-GAAP Gross profit margin, non-GAAP Operating expenses, non-GAAP Operating (loss)/income, non-GAAP Interest and other income/(expense), net, non-GAAP Net income (loss), non-GAAP Basic and Diluted Income (Loss) per Share, adjusted EBITDA and adjusted EBITDA Margin. These non-GAAP measures exclude certain special items that management does not view as part of 3D Systems’ underlying results as they may be highly variable, may be unusual or infrequent, are difficult to predict and can distort underlying business trends and results. Management believes that the non-GAAP measures provide useful additional insight into underlying business trends and results and provide a more meaningful comparison of period-over-period results. Additionally, management uses the non-GAAP measures for planning, forecasting and evaluating business and financial performance, including allocating resources and evaluating results relative to employee compensation targets. 3D Systems’ non-GAAP measures are not calculated in accordance with or as required by GAAP and may not be calculated the same as similarly titled measures used by other companies. These non-GAAP measures should thus be considered as supplemental in nature and not considered in isolation or as a substitute for the related financial information prepared in accordance with GAAP.
To calculate the non-GAAP measures, 3D Systems excludes the impact of the following items:

  • amortization of intangible assets, a non-cash expense, as 3D Systems’ intangible assets were primarily acquired in connection with business combinations;
  • costs incurred in connection with acquisitions and divestitures, such as legal, consulting and advisory fees;
  • stock-based compensation expenses, a non-cash expense;
  • restructuring charges (cost optimization plans), impairment charges, including goodwill, divestiture gains or losses, and severance charges pertaining to senior level employees;
  • certain compensation expense related to the 2021 Volumetric acquisition; and
  • revenue from divestitures included in current and comparable periods necessary to calculate revenue growth excluding the impact of divestitures

Amortization of intangibles, acquisition and divestiture related costs are excluded from non-GAAP measures as the timing and magnitude of business combination transactions are not predictable, can vary significantly from period to period and the purchase price allocated to amortizable intangible assets and the related amortization period are unique to each acquisition. Amortization of intangible assets will recur in future periods until such intangible assets have been fully amortized. While intangible assets contribute to the Company’s revenue generation, the amortization of intangible assets does not directly relate to the sale of the Company’s products or services. Additionally, intangible asset amortization expense typically fluctuates based on the size and timing of the Company’s acquisition activity. Accordingly, the Company believes excluding the amortization of intangible assets enhances the Company’s and investors’ ability to compare the Company’s past financial performance with its current performance and to analyze underlying business performance and trends. Although stock-based compensation is a key incentive offered to certain of our employees, we continue to evaluate our business performance excluding stock-based compensation; therefore, it is excluded from non-GAAP measures. Stock-based compensation expenses will recur in future periods. Restructuring charges (cost optimization plans), impairment charges, including goodwill, divestiture gains or losses, and severance charges pertaining to senior level employees, are excluded from non-GAAP measures as the frequency and magnitude of these activities may vary widely from period to period. Additionally, impairment charges, including goodwill, are non-cash. Furthermore, 3D Systems excludes contingent consideration recorded as compensation expense related to the 2021 Volumetric acquisition from non-GAAP measures as management evaluates financial performance excluding this expense, which is viewed by management as similar to acquisition consideration.

The matters discussed above are tax effected, as applicable, in calculating non-GAAP net income and basic and diluted earnings per share.

Adjusted EBITDA, defined as net income, plus income tax (provision)/benefit, interest and other income/(expense), net, stock-based compensation expense, amortization of intangibles, depreciation expense and other non-recurring and/or non-cash items all as described above, is used by management to evaluate performance and helps measure financial performance period-over-period.

A reconciliation of GAAP to non-GAAP financial measures is provided in the accompanying schedules.

3D Systems does not provide forward-looking guidance for certain measures on a GAAP basis. The company is unable to provide a quantitative reconciliation of forward-looking non-GAAP gross margins and non-GAAP operating expenses to the most directly comparable forward-looking GAAP measures without unreasonable effort because certain items, including legal, acquisition expenses, stock-compensation expense, intangible amortization expense, restructuring expenses, and goodwill impairment, are difficult to predict and estimate. These items are inherently uncertain and depend on various factors, many of which are beyond the company’s control, and as such, any associated estimate and its impact on GAAP performance could vary materially.

About 3D Systems

More than 30 years ago, 3D Systems brought the innovation of 3D printing to the manufacturing industry. Today, as the leading Additive Manufacturing solutions partner, we bring innovation, performance, and reliability to every interaction - empowering our customers to create products and business models never before possible. Thanks to our unique offering of hardware, software, materials and services, each application-specific solution is powered by the expertise of our application engineers who collaborate with customers to transform how they deliver their products and services. 3D Systems’ solutions address a variety of advanced applications in Healthcare and Industrial Solutions markets such as Medical and Dental, Aerospace & Defense, Automotive and Durable Goods. More information on the company is available at www.3dsystems.com

  
Investor Contact:John Nypaver
 Email:  Email Contact
Media Contact:Nicole York
 Email:  Email Contact
  

Tables Follow

3D Systems Corporation
Unaudited Condensed Consolidated Balance Sheets
December 31, 2021 and December 31, 2020

(In thousands, except par value) December 31,
2021
  December 31,
2020
ASSETS      
Current assets:      
Cash and cash equivalents $ 789,657     $ 75,010  
Accounts receivable, net of reserves — $2,445 and $4,392   106,540       114,254  
Inventories   92,887       116,667  
Prepaid expenses and other current assets   42,653       33,145  
Current assets held for sale         18,439  
Total current assets   1,031,737       357,515  
Property and equipment, net   57,257       75,356  
Intangible assets, net   45,835       28,083  
Goodwill   345,588       161,765  
Right of use assets   46,356       48,620  
Deferred income tax asset   5,054       6,247  
Assets held for sale         31,684  
Other assets   17,272       23,785  
Total assets $ 1,549,099     $ 733,055  
LIABILITIES AND EQUITY      
Current liabilities:      
Current portion of long term debt $     $ 2,051  
Current right of use liabilities   8,344       9,534  
Accounts payable   57,366       45,174  
Accrued and other liabilities   76,994       69,812  
Current deferred tax liabilities          
Customer deposits   7,281       7,750  
Deferred revenue   28,027       30,302  
Current liabilities held for sale         11,107  
Total current liabilities   178,012       175,730  
Long-term debt, net of deferred financing costs         19,218  
Convertible notes payable, net   446,859        
Long-term right of use liabilities   47,420       48,469  
Deferred income tax liability   2,173       4,716  
Liabilities held for sale         2,952  
Other liabilities   32,254       51,247  
Total liabilities   706,718       302,332  
Commitments and contingencies (Note 23)      
Stockholders’ equity:      
Common stock, $0.001 par value, authorized 220,000 shares; issued 128,375 and 127,626   128       128  
Additional paid-in capital   1,501,210       1,404,964  
Treasury stock, at cost — 0 shares and 3,494 shares         (22,590 )
Accumulated deficit   (621,251 )     (943,303 )
Accumulated other comprehensive loss   (37,706 )     (8,476 )
Total stockholders’ equity   842,381       430,723  
Total liabilities and stockholders’ equity $ 1,549,099     $ 733,055  



« Previous Page 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15  Next Page »



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us
ShareCG™ is a trademark of Internet Business Systems, Inc.

Report a Bug Report Abuse Make a Suggestion About Privacy Policy Contact Us User Agreement Advertise